Vxl-instruments TC15yy 15 Series Thin client - Service Manual Bedienungsanleitung

TC15yy Service Manual

6 Replacing RAM Note:  You will hear a distinctive click, indicating the module is correctly locked into position.  Use the hot glue gun to fix

Replacing Flash 7 4 Replacing Flash To replace Flash: 1. Remove the power adapter, pedestal and side cover. For more information see, section ‘R

8 Replacing Wireless LAN 5 Replacing Wireless LAN To replace wireless LAN: 1. Remove the power adapter, pedestal and side cover. For more informat

Replacing Wireless LAN 9 Figure 10: WLAN PCB 5. Pull in and remove the antenna cable. Figure 11: Antenna Cable 6. Insert the antenna cable of th

10 Replacing the Motherboard 6 Replacing the Motherboard To replace the motherboard: 1. Remove the power adapter, pedestal and side cover. For more

Replacing the Motherboard 11 5. Using the start screwdriver ( Item B in Figure 1) unscrew the motherboard screw. Figure 15: Motherboard Screws 6.

Copyright © 2004-2013 VXL Instruments Limited. All Rights Reserved. Information in this document is subject to change without notice and does not re

Table of Contents 1 Tools Required ...

Warning and Caution Statements Warning: It is best to wear an electrostatic discharge (ESD) cuff when handling electronic components (Motherboard,

Tools Required 1 1 Tools Required The tools required for servicing the TC 15yy series Thin Client are shown in Figure 1. Figure 1: Tools Required

2 Tools Required B. Phillips screwdriver C. Hex Nut driver 5.0 mm D. Nose pliers with spring

Pedestal and Side Cover 3 2 Pedestal and Side Cover Removing the Pedestal and Side Cover The procedure to remove the power adapter, pedestal and top

4 Pedestal and Side Cover Note: Retain the screws for future use. 5. Pull the side cover upwards and remove it as shown in Figure 4. Figure 4: Si

Replacing RAM 5 3 Replacing RAM To replace RAM: 1. Remove the power adapter, pedestal and side cover . For more information see, section ‘Removing